Product Description
Introduction
Product Features
With ultra-low negative pressure design (-50mmHg to -450mmHg) which is continuously adjustable.
With super-smart design and multi operating mode which is more practical.
With stable performance and long life which can operate more than 10,000 hours continuously.
The elaborate designed muffler system controls running noise of the device in a very low range (less than 45 dB), which does not affect the patient’s rest.
With microcomputer chip controlled, it has high accuracy and user-friendly operation interface.
Its intelligent memory system can automatically record the parameters and modes in the last setup, free from repeatedly setting after each starting up.
LCD digital display makes it convenient for user to adjust and operate.
Multiple safety power supply solutions:
1 .It adopts AC/DC power supply with the host in use of full DC power, having no danger of electric shock;
2.lts built-in spare battery may still endure 4 hours after a power failure, while it can last 8 hours in intermittent mode;
3.A 12V 5A vehicle DC power supply can also be used to ensure the continuous treatment of patients with negative pressure suction unit, when being transferred or going out;
Equipped with overflow alarm device, the unit will automatically stop in service and alarm when the dirty liquid reaches the warning line, to prevent the solution into the host and to avoid secondary pollution and damage.
With the function of automatic gas-leak alarm, the unit will then spontaneously stop and alarm when the negative pressure value remains no change within 10 minutes after the operation.
Multiple safety protections: gas-leak alarm, automatic overheat prevention, overflow prevention, etc.
Product Property
Adjustable scope: lOmmHg
Negative pressure range: -50 mmHg -450 mmHg; pressure display error: +0.2%
Suction flow: 1.51 /min~ 8.0L /min
Intelligence Setup: multi operation setup, more practical
Noise:not more than 45Db
External power supply:
12V 5A DC switch power (medically certified); the host, DC powered, has no risk of electric shock
Operation status:continuous and intermit-10t
multiple safety protections:
leakage alarm; automatic heat
dissipation while overheated,
anti-overflow protection
Scope of Application:
Suitable of acute wound,chronic diabetic wound and wound drainage of more exudate after surgery.
Contraindications:
Debridement undone or wound with the necrotic eschar; Wound with tumor tissue;Sinus connected with the organs; Wound with great vessels or organs exposed.
Detailed Photos
Packing list:
| NO. | Description | Quantity |
| 1 | Negative Pressure Drainage Device | 1 |
| 2 | AC Adapter & AC cable | 1 |
| 3 | User Manual | 1 |
| 4 | Solution collection bottle | 1 |
| 5 | Bottle cap | 1 |
| 6 | Connection interface | 3 |
| 7 | Silicon gel bent pipe | 3 |
| 8 | Filter | 3 |
| 9 | European standard plug | 1 |
Case 1
1. Right foot skin necrosis, infection;
2. Open fractures of the first wedge of the right foot;
3. After debridement suture of right foot skin laceration;
4. After open fracture operation of middle and lower segment of right femur.
FAQ
FAQ
Q1: Are you trade company or manufacture?
A1: We are manufacture. We have 2 factories in HangZhou and HangZhou City, and we sincerely welcome you visit our factory.
Q2: Can I get some samples?
A2: We are glad to offer you free sample.
Q3:What certificate does your company have?
A3: CE, EN ISO13485 Certification. If you need, we can send you the copy.
Q4: Are the OEM and ODM available?
A4: Yes. We offer OEM and ODM service. About new product, you can send us your sample. And we make sample for you. For your own brand, you can also send us your design of package and we make the package according to your requirement.
Q5: What is the Grade of your clean room?
A5: Our clean room is 100,000 grades.
Q6: If we need registration in our own country, then what kind of assistance you can offer?
A6: We can prepare the documents you need; free sample and other thing that can help you finish the registration.
Q7: Is there cheap shipping cost to import to our country?
A7: For small order, express will be best. And for bulk order, sea ship way is best but take much time. For urgent orders, we suggest via air to airport plus our ship partner send to your door.
Q8: Can we get support if we have our own market position?
A8: Please inform us your detailed mind on your market demand, we will discuss and propose helpful suggestion for you, to find the best solution for you.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Type: | Portable |
|---|---|
| Function: | Treatment |
| Theory: | Vacuum Pressure |
| Certification: | CE, ISO13485, FSC |
| LCD Display: | With LCD Display |
| Group: | Adult |
| Customization: |
Available
|
|
|---|
How long can portable vacuum pumps run continuously on a single charge or tank?
The duration of continuous operation for portable vacuum pumps on a single charge or tank can vary depending on several factors, including the specific model, battery capacity, pump capacity, and the level of vacuum required. Here are some key points to consider:
Battery-Powered Vacuum Pumps:
If the portable vacuum pump is battery-powered, the runtime will depend on the capacity and condition of the battery. Manufacturers typically provide information about the expected runtime under specific operating conditions. The runtime can range from a few minutes to several hours, depending on the pump’s power consumption and the battery’s capacity. It is important to refer to the manufacturer’s specifications to determine the expected runtime for a particular model.
Tank Capacity:
Some portable vacuum pumps may feature an integrated tank or reservoir to collect the vacuumed air or fluid. The tank capacity can vary depending on the pump’s design and intended application. The runtime of the pump on a single tank will depend on the pump’s flow rate and the size of the tank. A larger tank will allow for a longer duration of continuous operation before it needs to be emptied or emptied. Again, it is advisable to refer to the manufacturer’s specifications to determine the tank capacity and its impact on runtime.
Pump Capacity and Duty Cycle:
The pump capacity and duty cycle can also affect the runtime of a portable vacuum pump. Pump capacity refers to the rate at which the pump can create a vacuum or move air or fluid. A higher pump capacity may result in faster vacuum creation but could also consume more power, potentially reducing the runtime. Duty cycle refers to the amount of time the pump can run continuously before it needs to rest or cool down. Some pumps may have a duty cycle of 50%, which means they can operate for a maximum of 5 minutes out of every 10 minutes. Duty cycle limitations help prevent the pump from overheating and ensure its longevity. It is essential to consider the pump capacity and duty cycle when estimating the continuous runtime of a portable vacuum pump.
Operating Conditions:
The operating conditions can also impact the runtime of a portable vacuum pump. Factors such as the level of vacuum required, the ambient temperature, the viscosity of the fluid being handled, and the presence of any restrictions or blockages in the system can affect the pump’s performance and runtime. Operating the pump under extreme conditions or pushing it beyond its designed capabilities may result in reduced runtime or performance.
It’s important to note that the runtime estimates provided by manufacturers are based on ideal conditions, and actual runtime may vary in practice. To maximize the runtime of a portable vacuum pump, it is recommended to follow the manufacturer’s guidelines, ensure proper maintenance and calibration, and avoid overloading or overheating the pump.
In summary, the duration of continuous operation for portable vacuum pumps on a single charge or tank depends on various factors, including the battery capacity, tank capacity (if applicable), pump capacity, duty cycle, and operating conditions. Reviewing the manufacturer’s specifications and guidelines is crucial to determine the expected runtime for a specific model and to ensure optimal performance.
What are the power source options for portable vacuum pumps?
Portable vacuum pumps can be powered by various power sources, depending on their design and intended applications. Here are some common power source options for portable vacuum pumps:
- Electricity: Many portable vacuum pumps are designed to be powered by electricity. They typically operate using standard AC power from wall outlets. These pumps often come with power cords that can be plugged into a power source, making them convenient for indoor and laboratory use.
- Battery: Some portable vacuum pumps are designed with integrated rechargeable batteries. These pumps offer the advantage of being cordless and can be used in locations where access to electricity is limited or unavailable. Battery-powered vacuum pumps are often favored for fieldwork, remote areas, or mobile applications.
- Compressed Air: Certain types of portable vacuum pumps, such as Venturi pumps or air-powered vacuum pumps, utilize compressed air as their power source. These pumps rely on the Venturi effect to create vacuum or suction without the need for electricity or batteries. They are commonly used in applications where compressed air is readily available, such as in industrial settings.
- Gasoline/Diesel Engine: In some cases, larger portable vacuum pumps used for heavy-duty or industrial applications may be powered by gasoline or diesel engines. These pumps are often mounted on trailers or skids and provide high pumping capacity and mobility in outdoor or remote locations where other power sources may not be practical.
- Solar Power: With the increasing focus on renewable energy sources, there are portable vacuum pumps available that can be powered by solar panels. These pumps utilize solar energy to generate the necessary power for operation. They are particularly useful in remote or off-grid locations where sunlight is abundant.
The choice of power source for a portable vacuum pump depends on factors such as the intended use, availability of power sources in the application environment, mobility requirements, and the specific features and capabilities of the pump. It is important to consider these factors and consult the pump manufacturer’s specifications to select the most suitable power source option for your portable vacuum pump.
What is a portable vacuum pump, and how does it work?
A portable vacuum pump is a compact and lightweight device used to create a vacuum or pressure in various applications. It is designed to be easily transported and operated in different locations. Portable vacuum pumps are commonly used in industries such as HVAC, automotive, electronics, and laboratory settings. They offer convenience and flexibility for on-site or mobile operations where a vacuum or pressure source is required.
The working principle of a portable vacuum pump depends on its specific type, but here is a general overview of how a typical portable vacuum pump works:
- Power Source: A portable vacuum pump is powered by electricity, typically from a standard power outlet or a rechargeable battery. Some models may also be powered by a gasoline engine or compressed air.
- Vacuum Generation: The pump utilizes various mechanisms to create a vacuum or pressure. One common type is the rotary vane pump, which consists of a rotor with sliding vanes and an eccentrically placed cam. As the rotor rotates, the vanes slide in and out due to centrifugal force and the eccentric cam profile. This action creates expanding and contracting chambers, thus generating the vacuum or pressure.
- Inlet and Outlet: The portable vacuum pump is equipped with inlet and outlet ports. The inlet port is connected to the system or device from which the vacuum or pressure is being generated, while the outlet port is used to release the displaced air or gas.
- Control and Monitoring: Portable vacuum pumps often have controls and gauges to adjust and monitor the vacuum or pressure levels. These may include on/off switches, pressure/vacuum regulators, and pressure gauges to ensure the desired operating conditions are maintained.
- Filters and Accessories: Depending on the application, portable vacuum pumps may incorporate filters or other accessories to prevent contaminants from entering the pump or the system being evacuated.
It’s important to note that there are different types of portable vacuum pumps available, including oil-lubricated pumps and oil-free pumps. Oil-lubricated pumps require regular maintenance to replenish or replace the lubricating oil, while oil-free pumps eliminate the need for oil and are often preferred in applications where oil contamination is a concern.
Overall, portable vacuum pumps provide a convenient and efficient solution for generating vacuum or pressure on the go. Their compact size, ease of operation, and versatility make them valuable tools in a wide range of industries and applications.
editor by CX 2024-03-12
by
Tags:
Leave a Reply