This gearbox utilizes a 30:1 ratio worm-drive reduction for applications that require extremely slow and smooth rotational motion. The worm-drive design not only minimizes backlash but also eliminates back-traveling the gearmotor so a posture can be held even when power isn’t applied. The precision ground 3/8” stainless steel output shaft is backed by dual 3/8” ABEC 5 ball bearings to support a load from any orientation. The ¼” ABS plastic and light weight aluminum structure provides a rigid framework without adding unnecessary weight and is definitely easily installed to any flat work surface by utilizing the base mounting tabs. Our Regular Spur Gear motors will work with this gearbox (motor offered separately). The Vertical Shaft Worm-Drive Gearbox is ideal for turn-tables, time-lapse systems and low-speed applications that want high precision and torque.
Motor RPM required = 1 / (a few minutes per rotation desired / 30)
Example: 1 / (ten minutes per rotation / 30) = 3 RPM motor had a need to achieve 10 minutes per rotation (in max speed)
Dimensions 3.43″ x 1.93″
Product Weight 5.9oz (0.375 lbs)
Output Shaft Diameter 3/8″ (0.375″)
Motor Size Compatibility Regular Spur Gear Motors
worm wheel gearbox Ever-Power offers you the widest selection of standard, non standard and customised worm gearbox and worm equipment motor.
Ever-Power maintains the best degree of standard in production of worm gears in gearboxes. From the design of gearbox, material selection to production practice of worm equipment box and gear electric motor.
Models: 30, 40, 50, 60, 75, 85, 100, 125, 150, 175, 200, 250, 300, 350, 430
Ratio : 5/1 to 4900/1
Center Distances : 40 mm to 400 mm
Single stage / Double stage
Small Worm Gearbox Models like C.D. 50, 60, 75, 85, 100 mm and Ratio 30/1 or 40/1 are usually obtainable in stock or could be made on brief notice by customer.
Worm gearboxes are experiencing cast iron gear case, worm shaft is of Alloy Steel, duly hardened and tempered. The worm wheel is made of Chill Cast Phosphorous Bronze.
Ever-Power worm equipment boxes possess liberal ribbing for increasing temperature dissipation region, streamlined sump to carry more oil and lover of ample size which is effective in both part of rotation.
Wherever applicable, British in addition to Indian Design standards are used. Worm Shafts conform to case- hardening Alloy Steels, Worm Wheels conform to phosphorous-bronze according to BS 1400, While Equipment case conforms to C.I. Quality 20, IS210.
High reduction gear
Worm and wheel gear pairings provide large quickness reduction ratios with only one gear pairing in a far more compact space when compared with other styles of gears. You can expect up to maximum ratio of 100:1 with this products. Another benefit of the Worm and Wheel equipment pairings may be the low level noise they produce. Some disadvantages will be the general low efficiency and the fact that they generate high temperature.
Advantage of EP’s Worm Gears – “Frosty rolled Worm Gears”
1) The hardness of the helicoid surface has been attained by function hardening when the cool rolling was performed, providing Worm gears with better mechanical properties than machined worms because of truth that the metallic fibrous framework is not cut.
2) The surface hardness after frosty rolling is increased by 1.2 to 1 1.3 times when compared with the hardness of the original material, and the hardness of the helicoid surface area increases to around HB240 to 260.
3) Cool rolled worms are suitable for miniature gear applications since this is often rotated smoothly without damaging the worm wheels crafted from POM or additional soft materials.
4) Because of the implementation of this cold rolling technique, the helicoid surface of EP-Worm (M0.5 to 2.0) comes out with a mirror like complete. Thus, EP-Precision Chilly Rolled Worms give a smooth procedure and long-term durability.
Worm gears are made of a worm and a equipment (sometimes known as a worm wheel), with nonparallel, nonintersecting shafts oriented 90 degrees to each other. The worm can be analogous to a screw with a V-type thread, and the gear is certainly analogous to a spur equipment. The worm is normally the generating component, with the worm’s thread advancing the teeth of the gear.
Such as a ball screw, the worm in a worm gear may have a single start or multiple starts – meaning that there are multiple threads, or helicies, on the worm. For a single-start worm, each complete turn (360 degrees) of the worm advances the equipment by one tooth. So a gear with 24 teeth will provide a gear reduced amount of 24:1. For a multi-begin worm, the apparatus reduction equals the number of teeth on the apparatus, divided by the number of begins on the worm. (That is different from almost every other types of gears, where in fact the gear reduction can be a function of the diameters of both components.)
The meshing of the worm and the gear is an assortment of sliding and rolling actions, but sliding contact dominates at high reduction ratios. This sliding actions causes friction and high temperature, which limits the efficiency of worm gears to 30 to 50 percent. In order to minimize friction (and for that reason, high temperature), the worm and gear are made from dissimilar metals – for example, the worm could be made of hardened metal and the gear made of bronze or aluminum.
Although the sliding contact reduces efficiency, it provides very quiet operation. (The utilization of dissimilar metals for the worm and equipment also plays a part in quiet operation.) This makes worm gears ideal for use where sound should be minimized, such as in elevators. Furthermore, the utilization of a softer material for the gear means that it can absorb shock loads, like those experienced in heavy equipment or crushing machines.
The primary advantage of worm gears is their capability to provide high reduction ratios and correspondingly high torque multiplication. They may also be utilized as swiftness reducers in low- to medium-swiftness applications. And, because their reduction ratio is based on the number of gear teeth alone, they are smaller sized than other styles of gears. Like fine-pitch business lead screws, worm gears are typically self-locking, which makes them ideal for hoisting and lifting applications.
Worms & Worm Gears
EP Gear’s worms and worm gears provide a highly effective answer for power transmission applications requiring high-ratio speed reduction in a limited space using correct angle (90°), non-intersecting shafts. When properly applied, worms and worm gears provide the smoothest, quietest kind of gearing.
Because the efficiency of a worm equipment drive depends upon the lead angle and amount of starts on the worm – and because increased performance is always a goal, the ratio ought to be kept as low as possible. To run properly, worms and worm gears used together must have the same diametral pitch and threads.
Our complete line of worms and worm gears could be ordered through the EP Gear Guaranteed Same Time Shipment System for the quickest delivery possible.
90°, nonintersecting shaft applications answer highly specialized power tranny needs.
Our worm gears provide smoothest, quietest type of gearing.
They offer high-ratio speed reduction in minimal spaces.
Their efficiency is easily increased by lowering ratios.
With some ratios, there is level of resistance to back driving.
Offered from 48 DP to 3 DP
Stocked as single, double and quad start configurations
How exactly to Select High Efficient Worm Gearbox?
The worm gear production process can be relatively simple. Nevertheless, there is a low transmission effectiveness problem if you don’t know the how to choose the worm gearbox. 3 basic point to choose high worm gear efficiency that you should know:
1) Helix position. The worm gear drive efficiency mostly depend on the helix angle of the worm. Generally, multiple thread worms and gears is definitely more efficient than solitary thread worms. Proper thread worms can increase performance.
2) Lubrication. To choose a brand lubricating oil can be an essential factor to improve worm gearbox effectiveness. As the correct lubrication can reduce worm gear action friction and temperature.
3) Materials selection and Gear Manufacturing Technology. For worm shaft, the material ought to be hardened steel. The worm gear material ought to be aluminium bronze. By reducing the worm equipment hardness, the friction on the worm teeth is decreased. In worm production, to use the specific machine for gear reducing and tooth grinding of worms also can increase worm gearbox performance.
From a big transmission gearbox capacity to an even small worm gearbox load, you can choose one from an array of worm reducer that precisely suits your application requirements.
Worm Gear Container Assembly：
1) You may complete the set up in six various ways.
2) The installation should be solid and reliable.
3) Make sure to examine the connection between your electric motor and the worm equipment reducer.
4) You must use flexible cables and wiring for a manual installation.
With the help of the innovative science and drive technology, we’ve developed several unique “square package” designed from high-quality aluminium die casting with a lovely appearance. The modular worm gearbox design series: worm drive gearbox, parallel shaft gearbox, bevel helical gearbox, spiral bevel gearbox, coaxial gearbox, right angle gearbox. An NMRV series gearbox is a typical worm gearbox with a bronze worm equipment and a worm. Our Helical gearbox products consists of four universal series (R/S/K/F) and a step-less acceleration variation UDL series. Their structure and function are similar to an NMRV worm gearbox.
In the EP worm gears, the output shaft is offset by 90° from the drive shaft. A dual shaft for double-sided result or a cover for the short shaft end are optionally available as components. EP gearboxes have a high-quality, long-term synthetic lubricant based on polyethylene glycol, and are for that reason maintenancefree. They are characterized by high efficiency and self-locking.
Due to their relatively high backlash (~1-2°), worm gears aren’t suitable for positioning applications.
Worm Gear applications
App of worm gears, which is comparable to a typical spur and the worm, which really is a cylindrical equipment that resembles a screw, permits smaller gearboxes or planetary drives, whilst retaining torque or power. It is common for worm gears to possess reductions of 20:1, and also up to 300:1 or greater.
Typical gearing includes the unique capability which various other gearing components do not have – the “worm” can effortlessly spin the part, however the “gears” are not able to maneuver and fully rotate the worm-zone.
What’s the real reason for this inability to rotate the gear-worm?
The angle isn’t deep enough on the worm, so when the apparatus attempts to rotate the worm, high frictional pressure between worm shaft and gear parts keep carefully the zone stuck in position.
Focused on excellence, our employees possess the most important priority satisfying your equipment building needs and product improvement.
Also, we take pride in our equipment; few manufacturers have the gear to engineer steel parts as precise as we do. Even fewer manufacturing companies have the machining devices to check the tolerances we are able to hold.
Being a gearing manufacturer to Automotive level businesses, with a diverse supply of material types, allow us to attain the most challenging project requirements. The mixture of robust components, advanced manufacturer technology, reliability and our commitment to client satisfaction makes us a high provider in advanced gearing and shafting items.
Our gear manufacturing locations have over two decades of worm gear design knowledge, gained through many tasks that included varied sizes of custom made worm gears to print requirements.