Our regular 700 Series – the heart of Ever-Power swiftness reducer product line – has been serving industry reliably for over a decade. Its proven modular style has set the industry standard for performance and may be the most imitated item in the current worm gear acceleration reducer market. But why settle for a knock-off when you’re able to have the original – from Ever-Power.
Specifications
11 basic solitary reduction sizes
8 basic double reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow result shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow result bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
Product Features
The 700 Series’ huge oil reservoir provides efficient heat dissipation and lubrication for longer operating lifestyle.
Its multi-position mounting versatility allows for installation in virtually any position.
Housings are straddle-milled, top and bottom, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged housing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for maximum durability, along with greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures capacity for high torque and overhung loads.
Pipe plugs allow easy fill up, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal lifestyle.
Both 2D and 3D CAD drawings are available in our eCatalog.
Ever-Power worm gearboxes possess earned a reputation to be an industry benchmark worldwide. Our achievement originated from our relentless drive for quality with state-of-the-artwork technology, all while offering worm gearboxes are affordable prices. High flexibility accorded through a wide choice of mounting options, shaft configurations and electric motor interfaces, makes the Ever-Power worm gearbox the default choice for the sector. The helical-worm and the double-worm edition, with or without the torque limiter, soon add up to the advantage, creating a highly versatile drive system.
Ever-Power Worm gearboxes provide high torque with low swiftness gear ratio. Being simple and compact in design, these gears can achieve higher gear ratio than the helical gears. These worm decrease gears having screw type qualities act like helical gears, but its helix angle is typically comparatively larger) and its body is normally quite long in the axial direction. The gears in these gearboxes can be correct or left-handed depending upon the purpose.
Mounting option include universal housing, aspect flanges, foot (horizontal and vertical), shaft mounted with torque arm. Obtainable in Solid shafts (single or dual), with torque arm or torque limiter.
Worm reduction gears features
Principles
A worm gear is a kind of interlocking gear composed of a worm shaft and worm wheel. The worm is certainly shaped like a screw and the worm wheel is certainly a kind of gear machined to possess a tooth profile with the same configuration.
The operation of a worm gear is similar with that of a bolt and nut. The principle is the same as a nut that has been fixed so that it cannot rotate and for that reason progresses in the axial direction when the bolt can be turned.
The look of a worm gear is considered through the relationship between your rack and spur gear on the middle plane of the worm wheel.
Features
High reduction ratio One rotation of the worm rotates the worm wheel by one tooth. For this reason, in a 1 speed decrease gears, the wheel could be manufactured so that it will be rotated 1/60 (1/120 in unique applications).
Orthogonal shaft The shafts are aligned orthogonally due to the structure. This characteristic can help you layout the turning transmitting direction at the right angle.
The arbitrariness of the rotation direction The screw direction of the worm could be clockwise or counterclockwise (generally clockwise). It is possible to change the rotation direction of the worm wheel by changing the screw direction.
A wide variety of shaft layouts The wide selection of shaft layouts is one of the features of interlocking gears.For instance, right shaft output, still left shaft output, dual shaft input and dual shaft output, etc., combine for a total of 14 types (Figure 2) and, if attachment orientations are included, it is possible to select from over 40 layouts.
Low noise, low vibration The interlocking of the worm and worm wheel is definitely characteristic because the contact is certainly linear and the relative slide is great. In comparison to rolling power transmission, sound and vibration are extremely low. For this reason, this technology can be used to drive medical gear, elevators and escalators, etc.
The primary specifications of worm reduction gears
MA Series(Small)
Center distance(mm) 32,40
Reduction ratio 10,20,30,40,50,60
Input capacity(kW) 0.1～1(at an input of 1800 rpm)
Output torque(N・m) 20～66
Input speed(rpm) 0～1800
MA Series(Medium)
Center distance(mm) 50,63,80,100,125,140,160
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.4～30(at an input of 1800 rpm)
Output torque(N・m) 900～3570
Input speed(rpm) 0～1800
S Series
Center distance(mm) 50,60,70,80,100,120,135,155,175,200,225,250,300,350,400,450,500
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.3～255(at an input of 1800 rpm)
Output torque(N・m) 50～56600
Input speed(rpm) 0～1800
Key points when choosing a worm reduction gears
Selection
When choosing a worm reduction gears, the procedures for selecting the correct gear are described in the maker catalogs and the series and models should be selected according to those procedures. Particular care should be taken in crucial areas such as for example selecting the strain index, calculating the overhang load and examining the heat rated capacity from the manufacturer.
Cautions during use
When using a worm reduction gears, the heat produced through the initial period of use is high and running-in operation at 1/4, 1/2 and 3/4 of rated torque for eight hour periods is key to sufficiently attaining the performance of the worm decrease gears.
Maintenance and inspection
After completing running-in operation (approximately 50 hours), it’s important to change the lubricating oil and also to change the lubricating oil from then on about 1 time per year according to the operation manual offered by the manufacturer.
Product Description
The Worm Reduction Gear Box is supplied by our company is of high-quality. Our products are made by using premium quality materials and progress technology at our vendors end. They are widely used in a variety of sectors. Our products are easily available at an extremely low market prices.
Motor Mount Frame Options
TEC Motors, worm decrease gearbox.
Option A-160 B5 Body, Flange Mount.
Choice B-132 B14 Frame, Face Mount.
Option C-100/112 B5 Frame, Flange Install.
High efficiency and secure operation. High load capacity and overload functions. Output Torque = (Power (kW) x 9550 (Constant))/ Gearbox result speed (rpm).
Higher ratios available on request dependent on service factor (40:1, 50:1, 60:1, 80:1, 100:1)
DESCRIPTION
Wormgears of the VF series are milestones for the market worldwide. They succeeded in merging uncompromising quality with stateoftheart technology amd renown cost effectiveness.Absolute versatility is distributed by the wide choice of several mounting options, shaft configurations and motor Worm Reducer interface, all offered as regular. The helicalworm and the doubleworm edition, with or without the torque limiter, also accumulate, creating a highly versatile drive system.
ADDITIONAL INFORMATION
AMP
0.42 A
EFFICIENCY
84%
HP
0.12
KW
0.09
RATIO
7
RPM
200
TEMPERATURE RATING
20 level C TO 80 level C
TORQUE
4 Nm
HSN
8483.40.00
WARRANTY PERIOD
12 Months
The worm reduction gears can be found in two series: X and H.
The series X, having a worm and worm wheel set, comes in versions XA with shaft and XF-XC with mounting provisions for motor.
Version XF (bell casing + coupling) offers great versatility to suit a broad selection of applications and provides higher efficiency than the compact series XC, where the emphasis is on space performance.
Series H offers the same features because series X with an added plus: a spur equipment pre-stage at the insight end provides higher efficiency and a broader range of ratios compared to the X series.
Frame sizes 110 and 90 include a cast-iron housing cast enbloc, whereas smaller sizes use die-cast aluminium housings. The worm shaft is manufactured from casehardened and hardened alloy steel and ground-finished.
The worm wheel includes a cast iron hub with cast bronze insert. Hollow result shaft is supplied as standard.
Broad range of options available:
second input, output flange, single or dual extension result shaft, torque limiter with through cable, torque arm.