Single and dual reduction planetary equipment drives to be used with electric, hydraulic, atmosphere motors or mechanical power insight from high acceleration, low torque sources to deliver reduced speeds at increased torques. The input part has standard SAE pads for motor mounting. Available in the three result configurations demonstrated below. Many units could be furnished with an intrinsic parking brake.
One reduction drives are limited by 3500 RPM input; dual reduction drives to 5000 RPM. Units with integral parking input rate is limited to 2500 RPM.The same torque comes in either direction of rotation. Torque rankings are intermittent. For continuous operation reduce torque rankings to about 1/3 to 1/2 the values shown. Units provide 95% power transmitting efficiency.

Wheel Drive
Input side has regular SAE pads and hydraulic planetary drive splined insight. Output side has hub for installation automobile wheel. Free wheel can be done by using the spring disconnect to disengage the drive shaft. The disengage feature is regular on all wheel drives.

Shaft Output
Input side regular SAE pads with splined insight. Output side options include: Keyed circular, hexed, hollow, tapered or splined shaft.

Spindle Drive
Input side is standard SAE pads with splined insight. Output side has a flanged spindle for coupling to the strain.

Swing Drives
Ever-Power model 6 emerges with or without essential parking brakes. The “SW” Power Wheel provides extra-large tapered roller bearings, a ductile iron hub and temperature treated ring gear to minimize backlash growth caused by wear. The exterior bearing nut supplies the ultimate in shaft retention and shaft strength. Output can be a spindle shaft or different sizes of essential pinion gears.