China Custom Dual Suction Pump Power Assisted Liposuction with Fat Transfer Liposuction Cannula Needle Set vacuum pump ac system

Product Description

Product Description

Pal Liposuction Vibrolipo Liposuction Fat Suction And Collection Machines Removing
Excess Fat And Improving Body Contours
Liposuction is a surgical procedure that reduces body fat by removing localized fat deposits that are resistant to diet and exercise. The procedure can be used in conjunction with other fat-reducing surgical procedures; but it is not, by itself, a cure for obesity. Consult a doctor to determine if liposuction is a possible path toward reducing body fat based on your physical condition.

Liposuction is typically recommended for patients within 30 percent of their average body weight, who have isolated pockets of fat that have not responded to diet and exercise. The procedure is commonly requested for the hips and abdomen, but may also be used to improve contours of the back, arms, legs and face. The best results are seen in younger patients with good skin elasticity and tone, but the procedure can be performed on men and women of any age

S-LIPS6 is a new generation power assisted liposuction system, which integrated high-speed vibrating power assisted liposuction function, aspirator, and infusion function. With the single machine, it is feasible to implement a vibroliposuction surgery, without depending on other devices. It enhances the operation efficiency, and surgeons experience less fatigue during power liposuction with easier penetration and removal of adipose tissue. Microcomputer calculates and provides precise to-and-fro movement.

Product Parameters

The SmartLipo Dual Pump PAL Power Assisted Surgical Liposuction System BS-LIPS6 Specifications
* Input Voltage: 110/230 Volt at 50-60 Hz
* Suction performance: Up to 126L / min
* Maximum vacuum: -0.9 bar / 686 mmHG
* Flow rate infiltration pump: 2 to 221 / h
* Maximum pressure: 2.5 bar
* Conform cannula stroke: 2.25mm * 2
* Conform cannula frequency: 4000 strokes / min
* Conform cannula motor: Electronic motor, autoclavable

 

The SmartLipo Dual Pump PAL Power Assisted Surgical Liposuction System BS-LIPS6 including

* Vibration handpiece (electric)
* Suction needle kit (5 different size cannulas as 1 kit)
* Manual suction handle
* Injecting system (including tubing & needle)
* Storage bottle (2000ml x 2pcs)
* High Particulate filter
* Pedal switch

Installation Instructions

A protruding abdomen is 1 of the body characteristics that both men and women find troublesome. Many people develop excess fat and loose abdominal skin due to weight fluctuations, aging, and pregnancy. They often attempt to diet and exercise to slim the appearance of the abdomen but find it hard to eliminate a distended stomach despite their efforts. A healthy lifestyle is often no match against a “pooched” abdomen. It can be difficult or impossible to get rid of excess abdominal fat, tissue, and skin without surgery. Tummy tuck surgery is an ideal procedure designed to remove excess tissue and skin from the abdomen and to tighten the abdominal muscles.

Our Advantages

The SmartLipo Dual Pump PAL Power Assisted Surgical Liposuction System BS-LIPS6 Features
* One-way oil-free vacuum pump
* With portable cool-air inner-circulation frequency modulation
* Hard parts frosted system is both good at milling bone structures
* Adjustable CZPT water-injection system
* No heat generation during operation, no radiation and scald.
* Handle-made choice to crack emulsified lipocytes
* High resonant frequency and high speed of fat absorbing with high efficiency
* Well-distributed fat-absorbing process, flat operation positions, very light pains and quick recovery.

The SmartLipo Dual Pump PAL Power Assisted Surgical Liposuction System BS-LIPS6 Advantages
* Advantages for the surgeon
• Point accurate work/optimal fat suction
• Power-saving and gentle treatment
• Shorter operating times
• Optimized time/cost calculation
• Best possible gentle patient treatment
• Handpiece is compatible with all common cannulas.
* Advantages for the patient
• Optimal cosmetic results
• Gentle treatment
• No thermal stress on the tissue
• Fast recovery after the operation

 

Potential PAL PAL Liposuction Benefits:

Results vary and are not guaranteed for all patients. All images and benefits for procedures provided by Skin sational presented on this site represent specific results for individual clients.
• Doctors do not need to use as much force during a power assisted liposuction because the vibrating cannula helps release fat cells from the body
• PAL may be useful for treating areas that are notoriously difficult to sculpt, including the inner thighs, belly button area,
and male breasts
• Because the power assisted liposuction procedure takes less time to perform than manual liposuction, patients are potentially less susceptible to complications and safety risks
• Patients report many long-term benefits of fat removal with liposuction with the PAL procedure

Related Product 

BS-LIPSM vibration liposuction device .

BS-LIPS5 multifunctional liposuction device (with suction/vaccum pump, infiltration pump and vibration function). 

FAQ

RFQ :

1.What is Liposuction?

Liposuction is the surgical removal of excess fat with a thin, straw-like instrument called a cannula that is attached to a liposuction machine. The cannula is inserted into the fat layer of the skin, where it is manipulated within the layers to remove unwanted fatty deposits. The result is a correction of bulging, fatty areas into more attractive contours.

The concept of liposuction is surprisingly simple. Liposuction is a surgical technique that improves the body’s contour by removing excess fat deposits located between the skin and muscle

 

2.Is Liposuction safe?
Liposuction is a safe procedure, but there are risks and potential complications associated with any surgery. 

 

3.How many areas can be done during liposuction?
Usually between 3 to 4 areas can safely be done with a single liposuction procedure. Most of patients only need 1 surgery for all treatment areas. If additional areas are needed, they can be done as soon as 48 hours later.

 

4.What kind of Qualifications should a Liposuction Surgeon have?
iposuction is most commonly performed by surgeons who have acquired special training in the techniques of liposuction. Surgeons who perform liposuction or other cosmetic surgeries are called “cosmetic surgeons.”

 

5. Is there Pain or Discomfort after Liposuction Surgery?
During the 2 days immediately after liposuction, the amount of pain experienced depends on the type of anesthesia used for liposuction. Soreness is usually the most intense 2 to 4 days after liposuction and then decreases steadily. The tenderness and soreness typically is quite bothersome for up to 4 weeks, but gradually subsides over the following next 4 to 8 weeks.

 

Please send an inquiry to zoe 

Sincery International Limited / Lumsail Industrial Inc. (Factory)    

Website:lumsail  & lumsail        

Factory Address: 4/F, No.9Yi, Lane 2, Xihu (West Lake) Dis. Road,ZheJiang ,200331,China   

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Type: Slimming Machine
Theory: Vacuum
Application: Salon
Portable: Non Portable
Flow Rate: ≥700ml/Min (at Vacuum Pressure of 0.09MPa)
Input Power: 350va
Samples:
US$ 4680/Piece
1 Piece(Min.Order)

|

Customization:
Available

|

portable vane pump

How long can portable vacuum pumps run continuously on a single charge or tank?

The duration of continuous operation for portable vacuum pumps on a single charge or tank can vary depending on several factors, including the specific model, battery capacity, pump capacity, and the level of vacuum required. Here are some key points to consider:

Battery-Powered Vacuum Pumps:

If the portable vacuum pump is battery-powered, the runtime will depend on the capacity and condition of the battery. Manufacturers typically provide information about the expected runtime under specific operating conditions. The runtime can range from a few minutes to several hours, depending on the pump’s power consumption and the battery’s capacity. It is important to refer to the manufacturer’s specifications to determine the expected runtime for a particular model.

Tank Capacity:

Some portable vacuum pumps may feature an integrated tank or reservoir to collect the vacuumed air or fluid. The tank capacity can vary depending on the pump’s design and intended application. The runtime of the pump on a single tank will depend on the pump’s flow rate and the size of the tank. A larger tank will allow for a longer duration of continuous operation before it needs to be emptied or emptied. Again, it is advisable to refer to the manufacturer’s specifications to determine the tank capacity and its impact on runtime.

Pump Capacity and Duty Cycle:

The pump capacity and duty cycle can also affect the runtime of a portable vacuum pump. Pump capacity refers to the rate at which the pump can create a vacuum or move air or fluid. A higher pump capacity may result in faster vacuum creation but could also consume more power, potentially reducing the runtime. Duty cycle refers to the amount of time the pump can run continuously before it needs to rest or cool down. Some pumps may have a duty cycle of 50%, which means they can operate for a maximum of 5 minutes out of every 10 minutes. Duty cycle limitations help prevent the pump from overheating and ensure its longevity. It is essential to consider the pump capacity and duty cycle when estimating the continuous runtime of a portable vacuum pump.

Operating Conditions:

The operating conditions can also impact the runtime of a portable vacuum pump. Factors such as the level of vacuum required, the ambient temperature, the viscosity of the fluid being handled, and the presence of any restrictions or blockages in the system can affect the pump’s performance and runtime. Operating the pump under extreme conditions or pushing it beyond its designed capabilities may result in reduced runtime or performance.

It’s important to note that the runtime estimates provided by manufacturers are based on ideal conditions, and actual runtime may vary in practice. To maximize the runtime of a portable vacuum pump, it is recommended to follow the manufacturer’s guidelines, ensure proper maintenance and calibration, and avoid overloading or overheating the pump.

In summary, the duration of continuous operation for portable vacuum pumps on a single charge or tank depends on various factors, including the battery capacity, tank capacity (if applicable), pump capacity, duty cycle, and operating conditions. Reviewing the manufacturer’s specifications and guidelines is crucial to determine the expected runtime for a specific model and to ensure optimal performance.

portable vane pump

Can portable vacuum pumps be used for HVAC maintenance?

Yes, portable vacuum pumps can be used for HVAC (Heating, Ventilation, and Air Conditioning) maintenance tasks. HVAC systems often require vacuum pumps to evacuate or remove air and moisture from the system during installation, maintenance, or repair procedures. Portable vacuum pumps offer convenience and mobility, making them suitable for HVAC maintenance work in various settings. Here are some ways portable vacuum pumps are utilized in HVAC maintenance:

  • Evacuation of Refrigerant Lines: During HVAC system installation or repair, it is necessary to evacuate the refrigerant lines to remove any air or moisture that may negatively impact system performance. Portable vacuum pumps are commonly used for this purpose. They create a vacuum within the lines, allowing for the removal of unwanted gases and moisture, ensuring proper refrigerant flow and system efficiency.
  • Brazing and Soldering: When brazing or soldering HVAC system components, it is crucial to create a controlled environment free of moisture and air. Portable vacuum pumps can be used to evacuate the area around the joints, helping to prevent oxidation and ensuring secure and reliable connections.
  • Flushing and Cleaning: HVAC systems may require flushing or cleaning to remove contaminants, debris, or residual oil from the system. Portable vacuum pumps can assist in creating a negative pressure environment during the flushing process, aiding in the removal of unwanted particles and ensuring a cleaner system.
  • Leak Testing: Vacuum pumps are commonly used in HVAC maintenance to perform leak testing. By creating a vacuum within the system, the pressure can be monitored to detect any leaks. Portable vacuum pumps allow technicians to perform this test efficiently and effectively.
  • Refrigerant Recovery: In HVAC maintenance and service, refrigerant recovery is often required when decommissioning or replacing old systems. Portable vacuum pumps can be used to recover refrigerant from the system, allowing for safe and proper disposal or reuse.
  • Component Replacement: When replacing certain components, such as compressors or filters, portable vacuum pumps can be utilized to evacuate the system and ensure a clean and air-free environment during the replacement process.

Portable vacuum pumps offer the advantage of mobility, allowing technicians to move easily between different HVAC systems or work in locations where a fixed vacuum pump may not be accessible. They are available in various sizes and capacities to accommodate different HVAC system requirements.

When using portable vacuum pumps for HVAC maintenance, it is essential to follow manufacturer guidelines, industry best practices, and safety precautions. This includes proper evacuation procedures, monitoring pressure levels, and adhering to relevant regulations and guidelines for handling refrigerants and other hazardous materials.

Overall, portable vacuum pumps play a valuable role in HVAC maintenance by facilitating tasks such as evacuation, leak testing, and refrigerant recovery, contributing to the efficiency, performance, and longevity of HVAC systems.

portable vane pump

How do you choose the right portable vacuum pump for your needs?

Choosing the right portable vacuum pump requires careful consideration of several factors to ensure it meets your specific needs and requirements. Here are some key steps to guide you in the selection process:

  1. Identify Your Application: Start by clearly defining the application for which you need a portable vacuum pump. Determine the specific tasks or processes it will be used for, such as HVAC maintenance, laboratory experiments, automotive applications, or industrial processes. Understanding your application will help narrow down the options.
  2. Consider Vacuum Level and Flow Rate: Evaluate the required vacuum level and flow rate for your application. Different applications have varying vacuum level and flow rate requirements. Ensure that the portable vacuum pump you choose can achieve the desired vacuum level and provide sufficient flow rate to handle the desired tasks effectively.
  3. Check Capacity and Performance: Assess the capacity and performance specifications of portable vacuum pumps. Consider factors such as pumping speed, ultimate vacuum level, power rating, and duty cycle. These specifications determine the pump’s efficiency, reliability, and suitability for your application.
  4. Assess Portability and Size: As you are specifically looking for a portable vacuum pump, consider its size and portability features. Evaluate the weight, dimensions, and any additional features that facilitate easy transport and maneuverability. Ensure that the pump’s size and weight are suitable for your intended use and the environments where it will be deployed.
  5. Review Maintenance and Durability: Look for portable vacuum pumps that are designed for easy maintenance and have a reputation for durability. Check if the pump requires regular oil changes or if it is an oil-free design. Consider the availability of replacement parts and the manufacturer’s support for maintenance and repairs.
  6. Consider Noise and Vibration Levels: Evaluate the noise and vibration levels of the portable vacuum pump, especially if it will be used in environments where noise or vibration may be a concern. Look for pumps that have noise-reducing features and are designed to minimize vibrations for quieter operation.
  7. Review Safety Features: Ensure that the portable vacuum pump has appropriate safety features for your application. This could include features like thermal protection, overpressure protection, or built-in safety mechanisms to prevent oil or chemical leaks. Safety should be a priority when selecting a pump.
  8. Consider Budget and Cost: Determine your budget for the portable vacuum pump and consider the overall cost of ownership. Take into account the initial purchase price, ongoing maintenance costs, and energy consumption. Balancing performance, quality, and cost-effectiveness is crucial in making the right choice.
  9. Read Reviews and Seek Expert Advice: Read reviews and seek recommendations from experts or professionals in your specific industry or application. Their insights and experiences can provide valuable guidance in selecting a reliable and suitable portable vacuum pump.

By following these steps and considering the factors mentioned, you can make an informed decision and choose the right portable vacuum pump that best matches your needs, ensuring efficient and reliable vacuum or pressure generation for your specific application.

China Custom Dual Suction Pump Power Assisted Liposuction with Fat Transfer Liposuction Cannula Needle Set   vacuum pump ac system	China Custom Dual Suction Pump Power Assisted Liposuction with Fat Transfer Liposuction Cannula Needle Set   vacuum pump ac system
editor by CX 2024-03-02

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *