ep

December 6, 2019

Worm drive gearbox with motor
A robust worm-drive gearbox powered by an MM28 motor. Ideal applications where a simple to fit, high torque output is required. Great for student based projects including robots and buggies.
The machine has been designed to ensure that the output shaft can be ‘clicked’ in and out for modification. Electronic.g. reducing to size. The motor is snap installed into its cradle to engage the apparatus and worm.
Details
1 – 6V DC
0.1A to 1A based on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
Overall dimensions of box + motor: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the electric motor is not turning. The high gear ratios of 216:1 or 336:1 get this to gearbox appropriate for small strolling robots, lifting mechanisms, and additional applications where high torque is definitely desired.
The low-voltage motors in the worm gearbox operate on 1.5-4.5 volts and draft to a few amps, making them ideal applicants for the DRV8833 motor driver carrier. Electric motor overheating can be due to excessive stalling, also at very low voltages. We advise that you use stall-detection sensors, or just view your robot, to ensure that it doesn’t stall for lots of seconds at a time.
This gearbox has a 4 mm diameter, round output shaft, which works with the wheels that are compatible with Tamiya 4 mm, round shafts. Our 3 mm universal mounting hub also fits on small threaded end of the shaft, although it is not particularly designed to work with this kind of shaft (the hub’s set screw could damage the thread on the shaft).
Ever-Power gear motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right angle worm geared motors established new criteria for reliability, performance and economic climate with unparalleled features including hollow shafts in the smallest sizes. An inverter friendly style provides for easy integration right now and a future proof option. The Ever-Power gear motor offers total flexibility in mounting options includes shaft, base, encounter, and flange solutions. The engine terminal box could be mounted in substitute positions rotated in 90º steps around the engine frame offering for unparalleled integration possibilities.
Ever-Power gear motors comply with North American and International specifications, including NEMA, IEC, CSA, and CE, the Ever-Power series allows for worldwide acceptance, a true total answer for our global clients.
Excellent protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dirt tight and hose proof,and can be utilized outside or in wet and dusty conditions without the use of additional enclosures. Full rated output is available at the result shaft of the machine.
Product Features
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change first after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Additional features:
Connecting with Connect connectors.
With built-in inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm equipment motors are the remedy for applications requiring a part turn, optional dual result, or an inability for the engine to be back again driven. The DC right angle gear motors are created for continuous and intermittent duty operation. Our right angle gear reducers were created with a number of mounting plate choices, making them perfect for a number of DC motor based applications. We offer 12 ratios which range from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Standard brush life of 2000+ hours (varies by application)
EP Products Worm Equipment Motors are created to generate high torque in a small package size. Worm Equipment Motors are excellent for applications that want a self- locking or breaking feature because the output shaft can’t rotate when there’s no power applied. Additionally, Worm Gearheads can transfer movement in 90 degrees. With various decrease ratios, precision cut gears, voltages and sizes, EP Products includes a DC Worm Gear Motor solution for the application.
Features and Benefits
Very High Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Ability to Handle Large Gear Decrease Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Security Door Locks / Industrial Conveying Systems / Security Gates / Oral Seats / Ambulance Cots & Stretchers Quite a few DC Motors could be complimented with one of our Worm Gearheads. EP Items will continue to work with you to design and produce a Worm Gear Motor that may optimize the functionality of your unique application.
Built to your unique requirements
Motor Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Cut / Round / Splined / Other)
General Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Additional Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm motor uses a metal gear box for toughness and a higher torque output. Due to the special mechanical structure of the worm drive the motor output shaft can be self locking and will not be rotated.
This part runs on the two wire connection and supports direction control along with PWM speed control. Ranked voltage is 12v and will attain 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Ranked Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear units from EP DRIVESYSTEMS especially display their power in applications where high equipment ratios are essential. Our worm geared motors are as a result optimally suited for make use of in intralogistics, packaging technology and the food & beverage industry.
Four great known reasons for EP worm geared motors:
Rugged
Our worm geared motors have a high overload capacity
Maintenance Friendly
Washdown versions enable simple and effective cleaning of the drive program.
Corrosion protection
The NSD tupH sealed surface area conversion is exceptionally chemical substance, corrosion and abrasion resistant.
Flexibility
Our modular style give users optimum freedom.
The modular system for maximum flexibility: Our EP worm gear units
There are many applications that want drive systems, and each one of these has its unique requirements. The EP series worm gear motors can be quickly and efficiently adapted to satisfy your needs.
Worm gear models impress with their high power density and small design. If required, we are able to also supply them with the impressive nsd tupH surface area treatment.
As well as the basic EP casing, you can expect an extensive type of worm motor bolt-on components to customize the product including torque arms, shaft covers and output flanges. These can be very easily field installed, but we will also be happy to assemble the average person components for you.
Find out more about our modular SI worm geared motors!
Find out more
Clean and Clean: The EP worm equipment unit SMI
SMI worm gear devices feature a smooth, corrosion-resistant alluminum alloy housing. Optional nsd tupH surface conversion makes this product ideally suited for severe and challenging industries like food processing and pharmaceuticals.
Flexible input designs such as for example NEMA, IEC or direct motor mounts in extra foot or flange mounted housing designs.
Worm geared motors
Worm geared motors for little power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared engine program. The units have got on all sides different fixing possibilities and enable a simple assembling for the client.
Various other drive configurationscan be created by use of built-on accessories (e.g. torque arm and result flanges). The housings are made in light weight structure out of aluminium die cast. Engine attachment is realised in general by means of IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:result shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm
Purchase Worm Drive Gearbox with Motor – incorporating the following features: 1 to 6V voltage rating, 17100 rpm no load swiftness, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm wide, 40mm high, a robust worm drive gearbox powered by an MM28 engine (included), most suitable for applications where a simple to match, high torque output is necessary, nylon housing and gear, requires light essential oil or silicon grease lubrication, well suited for student based projects including robots and buggies.
Most suitable for applications where an easy to match, high torque output is required
Ideal for student based tasks including robots and buggies
Reversible High torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
Reversible High torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
Features:
The engine is Gear DC engine with micro-turbine worm, you can transform the wiring-connection to improve motor rotation.
Turbo worm geared motor with self-lock, that’s, regarding motor without electrical, the output axis is certainly fixed, self-lock.
The reducer output shaft arranged vertically with the electric motor shaft, whole engine output shaft relatively-short than general gear electric motor, widely used to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the screen, door, Mini winch. Ect.
In sumo robot or combat robot competition where high holding torque’s electric motor is essential in order to avoid your robot being pushed by your opponent robot. The worm gear is definitely a better option compared to the spur gear motor. Why is worm gear so unique? Check this wiki out: Worm Drive.
“Unlike with ordinary equipment trains, the direction of transmission (insight shaft vs result shaft) isn’t reversible when using large reduction ratios, due to the higher friction involved between the worm and worm-wheel, when usually an individual start (a single spiral) worm can be used. This is often a advantage when it is desired to eliminate any probability of the output driving the input.”
In other words, it is challenging to push your load (example, your robot) if the motor isn’t power or rotate.
Features and Spec:
Metal gear box
Output shaft is self-locking due to the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g