Vapor Recovery Vacuum Pump Oil Pump

Vapor Recovery Vacuum Pump Oil Pump

Vapor oil and gasoline restoration vacuum pump Software
Vapor oil and gas recovery vacuum pump is a comparatively consummate pump for oil-gasoline recovery, functioning underneath the ambient temperature at -40~60°C. It can be utilised independently or as a part of oil-gas restoration technique in gas stations, which is mainly used for oil-gas restoration, to lessen air pollution and help save strength.
With the growing requirement on getting gain of environmental pollution and strength properly, this Vapor oil and gas restoration vacuum pump will be used to this subject widely.

Structural Characteristic

Characteristic of NP80 series oil-fuel recovery vacuum pump: a shaft dived by motor is fixed on the pump entire body, and its a single stop in the pump human body is fixedly connected a crank which is jointed to a connection rod a piston in liner with reciprocating motion is fixed on the prime of the connection rod, and the liner is mounted in the pump body a valve seat assay above the piston has inlet valve and outlet valve which are examine valves. Apart from, the inlet cavity and outlet cavity on the pump physique are related with the inlet valve and outlet valve respectively by way of a pipeline, the inlet cavity is connected with the coupling of an air eliminator, and one particular stop of the coupling is connected with the hose via the hose coupling the hose with inside and exterior casing is related with nozzle.

 

Framework diagram:

Observe:  There are six electrical wires and 5 colors in WDVP-a hundred

 

one)      Blue ,white ,brown  connect  380 Voltage energy.

two)      There are two black electrical wires connect 220 Voltage energy.  (A single join 220 voltage power, yet another hook up Zero)

three)      The yellow one particular connects Serra.

four)      The rest (blue, white, brown) needn’t hook up.

five)      Only two blacks manage the work.

 

Specification

 

l Rotary vane vacuum pump

l Pump with motor, no affect the gasoline dispenser typical operation

l Compact dimension, self-lubricating Overall performance

 

CZPT Specification

 Model

One PUMP Head

Double Pump Head

 Max. Circulation Rate

sixty five L/Min

one hundred twenty L/Min

 Working temperature

-25~+50 °C

 Max.Vacuum

.07MPa

 Motor Speed

2800RPM

 Motor Electrical power

370W

 Power CZPT

380V/50Hz or 220V/50Hz

 Noise

≤70dB

 Connection

one/4″

three/eight”

Characteristics

 

Straightforward installation and servicing: remove the 4 screws to eliminate the pump head for effortless installation and maintenance High vacuum degree assures clearing of flooded vapor hoses. Available for Self-contained Suction Pump Dispenser and submersible Pump Dispenser. Self-contained & solitary section two electrical power source, safe and efficient. Handles 12 fueling positions with six nozzles in simultaneous total circulation operation. Low sound, gradual temperature increase.

 

one) Strong applicability: a small and powerful construction, the pump head can be installed at several angles, supplying much more ease for the modification of the tanker b applies to ethanol gasoline, methanol gasoline.

2) Lower sound design and style: noise does not exceed 62 decibels.

three) Provider daily life: Soon after rigorous lifestyle and security check, the provider existence is ≥60000 several hours.

four) CZPT basic safety measures: The fireplace escape valve is outfitted with inlet and outlet ports.

 

Bundle Info

   Each Vacuum pump fixed by foaming,then in a carton.

 

Product

Size 1.026

N.W(kg)

G.W(kg)

Voltage

Solitary/Double

380V

Solitary

365*275*245

12.32

13.05

 

Double

490*275*245

fourteen.22

fourteen.95

220V

One

430*275*245

fourteen.32

fifteen.05

 

Double

525*275*245

16.22

sixteen.95

 

Vapor Recovery Vacuum Pump Oil Pump