DESCRIPTIONS
DDCY-Q sequence vacuum stress solenoid valve, which is put in on a committed mechanical vacuum pump. Installed in the mechanical vacuum pump inlet, and synchronize the opening and closing of the pump.
When the pump stops operating or power offer is suddenly interrupted, the valve can rely on the pressure of atmospheric strain and vacuum valve plate closes routinely closed vacuum system to preserve its vacuum, and the air stuffed by way of the orifice valve into the pump chamber in get to steer clear of contamination of the vacuum pump oil countercurrent system.
Technical specs
| MCZPTL | DN(mm) | Dimension(mm) | SPECIFICATION | Materials | ||||||||
| D | D1 | H | n-d | LEAK Rate(Pa .L/s) | Open up&Near TIME(s) | Power(w) | Offer | Bodyweight(kg) | VALVE BODY | SEAL | ||
| DDCY-20Q | 20 | sixty five | 50 | 50 | four-M6 | <6.7X10-2 | <3 | 14 | -220V 50Hz | one.three | CARBON Steel | RUBBER |
| DDCY-25Q | 25 | 70 | fifty five | eighty five | 1.five | |||||||
| DDCY-32Q | 32 | seventy eight | sixty four | 95 | two | |||||||
| DDCY-40Q | 40 | 85 | 70 | 95 | 3 | |||||||
| DDCY-50Q | fifty | a hundred and ten | ninety | 100 | four-M8 | three.5 | ||||||
| DDCY-65Q | sixty five | a hundred twenty five | a hundred and five | a hundred and ten | five | |||||||
| DDCY-80Q | 80 | one hundred forty five | 125 | a hundred and twenty | 6.5 | |||||||
| DDCY-100Q | 100 | 170 | one hundred forty five | a hundred and forty | eight-M10 | ten | ||||||
| DDCY-125Q | one hundred twenty five | 195 | 170 | 165 | 15 | |||||||
| DDCY-150Q | a hundred and fifty | 220 | 195 | one hundred ninety | twenty | |||||||
| DDCY-200Q | two hundred | 275 | 250 | 240 | 12-M10 | thirty | ||||||
Applicable doing work medium: air and non-corrosive gases.
Be aware: The uper flange on the pressure diffenence with a sealing groove, the reduce flange with out sealing groove
| STM | DESCRIPTION | QTY | REMARK |
| 4 | BELT | 5 | * |
| thirteen | O-RING | two | * |
| 14 | SHAFT SEAL | two | * |
| 14A | SHAFT SEAL | 3 | * |
| sixteen | Extended SHAFT SLEEVE | one | * |
| 17 | O-RING | 5 | * |
| 18 | BEARING | 2 | ** |
| 21 | Gas BALLAST VALVE | 1 | * |
| 25 | Quick SHAFT SLEEVE | two | * |
| 29 | O-RING | one | * |
| 32 | Crucial | two | ** |
| 34 | Key | 1 | ** |
| 35 | Important | 2 | ** |
| forty five | VACUUM RESERVOIR OIL VALVE | 1 | ** |
| forty six | OIL FILTER Device | 1 | * |
| 51 | O-RING | 1 | * |
| fifty eight | Center SHAFT SLEEVE | two | * |
| fifty nine | O-RING | one | * |
| sixty three | O-RING | 1 | * |
| sixty seven | O-RING | one | * |
| 87 | O-RING | one | * |
| 88 | O-RING | 1 | * |
| 89 | SOLENIOD VALVE | 1 | * |
| ninety two | O-RING | 1 | * |
| one hundred | POPPET VALVE | 3 | * |
| 100C | VALVE CAP | 6 | * |
| 100D | SPRING | eighteen | * |
| 100E | POPPET VALVE | 6 | * |
| 100F | VALVE DECK | three | * |
| 100G | O-RING | 3 | * |
| 103 | O-RING | 2 | * |
DESCRIPTIONS
Vacuum bellows for relationship between the device and piping, pipe and tubing. It plays damping, disinfection and compensation because of to the vacuum bellows unique functions, it is extensively used in industrial fields of scientific investigation, aerospace, aviation, petroleum, chemical, pharmaceutical, electronics, electrical, vacuum processing.
SPECIFICATION
| Measurement | Waveforms | |||
| Φ50 | 3 | 6 | nine | twelve |
| Φ80 | ||||
| Φ100 | ||||
| Φ150 | ||||
| Φ200 | ||||
| Φ250 | ||||
| Φ300 | ||||
| Φ400 | ||||
| Φ500 | ||||
| Φ600 | ||||
| Φ700 | ||||
| Φ800 | ||||
| Φ900 | ||||
| Φ1000 | ||||
| Φ1200 | ||||
| Φ1400 | ||||
| Φ1600 | ||||
| Φ1800 | ||||
| Φ2000 | ||||
Notice:Vacuum Bellows be devided to loose flanges and without having free flange, the measurement, size and waveforms can also be CZPT according to customer’s requirements.
IVF VACUUM PUMP INLET OIL MIST FILTER
CZPT material is stainless metal woven mesh and stainless metal punching gap mesh, which is employed in previous stage dewater in hefty oil combustion method, can also be used for chemical liquid filtration, precision is one hundred um
CZPT aspect material is stainless metal spherical microporous mesh, utilize to the pretreatment and publish-therapy method of electronic, petroleum, chemical, pharmaceutical, food and other industrial departments. To more purify water top quality which consists of reduced suspended impurities (much less than 2 ~ five mg/L).
OMF VACUUM PUMP OUTLET OIL MIST FILTER
My firm produced OMF collection outlet oil mist filter for rotary piston vacuum pumps and rotary vane vacuum pumps. These oil mist filters can filtrate oil mist effectively which discharged by vacuum pumps. Lowering environment air pollution drastically and decreasing the oil consumption properly. OMF oil mist filters have by pass valves and exhaust stress display. If exhaust stress is too large, by pass valve will be opened instantly for decreasing force. In comparison to other general oil mist filters, OMF oil mist filters are more secure, a lot more trustworthy. The outer layer of filter core has removable cloth for changing or washing when the cloth is dirty, greatly extending the life of filter core.
Specs
| Model | OMF-40 | OMF-50 | OMF-63 | OMF-80 | OMF-100 | OMF-125 | OMF-150 |
| Outlet Dia (mm) | DN40 | DN50 | DN63 | DN80 | DN100 | DN125 | DN150 |
| Rated Gasoline Flow (L/S) | 30 | 60 | 150 | 220 | 300 | 450 | 600 |
| By Pass Valve Operating Pressure (MPa) | Relative Pressure .571 Complete Force .125 | ||||||
| Max Discharge Pressure (MPa) | Relative Pressure .04 Absolute Pressure .14 | ||||||
| Connected Vacuum Pump Model | 2H-15DVA 2H-15DVW H-25DVA H-25DVW | 2H-30DV 2H-45DVA H-50DV H-60DVA | 2H-50DV 2H-70DV 2H-80DV 2H-100DV3 H-70DV H-100DV H-120DV | 2H-100DV 2H-120DV 2H-160DV H-150DV H-160DV H-215DV | 2H-150DV 2H-225DV H-225DV H-300DV | 2H-300DV H-400DV 2H-340 H-450 | 2H-450 H-600DV |
| Web Weight (kg) | 13 | 17 | 23 | 35 | 60 | 80 | 110 |
Benefit
1. Substantial vacuum, higher exhausting performance in medium or large vacuum, extensive operating range, apparent vitality-preserving final results.
two. Integrated rack, compact framework, small necessary place.
3. High automation, simple procedure, straightforward routine maintenance, secure, reliable and sturdy working.
4. To personalize a unique pump technique as for each the specific requirements of the conclude consumer.
Application
Widely employed in vacuum coating, vacuum metallurgy, vacuum warmth treatment method, vacuum drying, vacuum impregnation, vacuum strainer, poly-silicon generation, aerospace simulation and so on.
Sea Port: HangZhou/ZheJiang , China
Normal: CE Mark, Spare Elements Of High Stage
Shipping: Usually in accordance to our manufacturing unit production schedule, but we can follow your 1st purchase time
Warranty: If pump seem good quality problems, free replacements of spare components will be presented inside one 12 months
WE CAN Offer YOU
one. On-time Shipping, with More Choice
2. Best CZPT Support
3. Tailored Vacuum Answers and Service
four. Samples Accessible
5. Long CZPT Guarantee
six. Fast Reaction to Customers’ Comments in 12 hours
OVERVIEWS OF Manufacturing facility:
Growth VACUUM Products CO., LTD
Include:HangZhou INDZONE, HangZhou, ZHangZhouG, CHINA Computer: 317106
TEL:-576-83598308 FAX:-576-83598309
