November 8, 2019

Single and dual reduction planetary gear drives to be used with electric, hydraulic, air flow motors or mechanical power insight from high acceleration, low torque sources to deliver decreased speeds at increased torques. The input aspect has standard SAE pads for electric motor mounting. Available in the three result configurations demonstrated below. Many units could be furnished with an intrinsic parking brake.
Single reduction drives are limited by 3500 RPM input; double reduction drives to 5000 RPM. Units with essential parking input speed is bound to 2500 RPM.The same torque comes in either direction of rotation. Torque ratings are intermittent. For continuous operation reduce torque ratings to about 1/3 to 1/2 the values shown. Products provide 95% power transmitting efficiency.

Wheel Drive
Input side has standard SAE pads and Plastic Gear Rack splined input. Output aspect has hub for installation automobile wheel. Free wheel can be done by using the spring disconnect to disengage the drive shaft. The disengage feature is definitely regular on all wheel drives.

Shaft Output
Input side standard SAE pads with splined insight. Output side options include: Keyed round, hexed, hollow, tapered or splined shaft.

Spindle Drive
Input side is standard SAE pads with splined input. Output side includes a flanged spindle for coupling to the load.

Swing Drives
Ever-Power model 6 is offered with or without essential parking brakes. The “SW” Power Wheel provides extra-large tapered roller bearings, a ductile iron hub and high temperature treated ring equipment to minimize backlash growth caused by wear. The external bearing nut provides the ultimate in shaft retention and shaft strength. Output can be a spindle shaft or different sizes of integral pinion gears.