Flexible plastic gear racks in 0.8 Mod (32DP) pitch. These racks can offer an easy to set up rotational drive as high as approx 270 degrees for instance on camera focus bands. They also offer an economical alternative where a large gear is required or an extended stretch (up to 2 metres) of linear movement is preferred. These racks are compatible with our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER share racks are made for high precision linear movement applications. We offer a large collection of racks which range from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Ground Racks (MRGF – MRGFD) : Has the highest strength and precision in the EVER-POWER regular rack series. Bolt holes could be remachined as carburizing can be applied just within the tooth region. J Series products are also available.
Hardened Floor Racks (KRGF-H – KRGFD-H) : Temperature treated surface gears with high precision and power has excellent cost-overall performance ratio. J Series items are also available.
Hardened Racks (KRF-H/KRFD-H) : That is a solid rack made of Chromoly steel, treated simply by carburizing. Has high-power, high wear resistance, and enables downsizing of SR racks. J Series items are also available.
Hardened Racks (SRF-H/SRFD-H) : Steady Hardened racks with high power, extended life span are affordable. J Series items are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Steel Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack gets the same tooth elevation and face width sizes, more compact and reasonably priced compared to SRF Racks
Steel Racks (SR) : Low cost, large selections of modules and amount of teeth. J Series items are also available.
Steel Racks w/ Machined Ends (SRF) : Low priced, large choices of modules and amount of tooth. J Series items are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low priced, large choices of modules and number of the teeth. J Series products are also available.
Stainless Steel Racks (SUR•SURF•SURFD) : Suitable for food machinery due to SUS304 materials\’s rust-resistant quality.
Plastic-type material Racks (DRF/DRFD/DRFK) : Plastic racks with little dimensional change, absorb lesser water than MC Nylon racks. J Series products are also available.
Plastic-type material Racks (PR•PRF) : Made form MC nylon, can be used without lubrication.
Brass Racks (BSR) : Small pitch racks manufactured from free-cutting brass, excellent workability and high rust resistance.
Steel Round Racks (SRO – SROS) : Convenient in applications where in fact the rack has the reciprocal motion. S Type is simple to install.
Stainless Steel Circular Racks (SURO) : Same dimensions as SRO racks, except in stainless. Use where rust-resistance is necessary.
Floor Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent items with high precision and strength, and low sound and abrasion characteristics.
Metal Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration because of larger get in touch with ratio of helical gears.
Molded Versatile Racks (DR) : Found in applications due to its flexibility, where steel racks do no have this attribute. Pinions and accessories are also available.
Molded Flexible Rack Clamps (SRS) : Utilized to secure Molded Flexible Racks.
Molded Flexible Rack Pinions (SSDR) : Spur pinions utilized for molded flexible racks.
Flexible Rack Guideline Rails (ARL) : Guide Rails for Molder Versatile Racks.
You can expect as standard a wide variety of Racks in Metric and Imperial sizes. Spur Racks are available in Steel (En8) and up to 2 metres long. STAINLESS and Delrin (Plastic-type) Racks are created with Spur and Helical tooth forms, square and circular sections up to 400mm long. Alternative materials are available on request. Moulded Hostaform Racks can be found to offer a cost-effective alternative where less torque is required.
Variable stiffness can improve the capacity for human-robot interacting. Predicated on the mechanism of a versatile rack and equipment, a rotational joint actuator called vsaFGR can be proposed to regulate the joint stiffness. The flexible gear rack could be regarded as a mixture of a nonlinear elastic component and a linear adjusting mechanism, providing advantages of compactness. The joint stiffness is in the range of 217-3527 N.m/rad, in fact it is inversely proportional to the 4th-purchase of the gear displacement, and nearly independent from the joint angular deflection, providing benefits of quick stiffness regulation in a short displacement of 20 mm. The gear displacement with respect to the flexible gear rack is certainly perpendicular to the joint loading force, so the power necessary for stiffness regulating is really as low as 14.4 W, providing advantages of energy saving. The high compactness, great stiffness range and low power cost of vsaFGR are proved by simulations and experiments.
Flexible plastic gear racks in 0.8 Mod (32DP) pitch. These racks can provide an easy to set up rotational drive as high as approx 270 degrees for instance on camera focus rings. They also provide an economical solution where a huge gear is required or a longer stretch (up to 2 metres) of linear motion is preferred. These racks are compatible with our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER stock racks are made for high precision linear movement applications. We offer a large collection of racks which range from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Ground Racks (MRGF – MRGFD) : Gets the highest strength and precision in the EVER-POWER regular rack series. Bolt holes can be remachined as carburizing is definitely applied only within the tooth area. J Series products are also available.
Hardened Floor Racks (KRGF-H – KRGFD-H) : Warmth treated surface gears with high precision and strength has excellent cost-functionality ratio. J Series items are also available.
Hardened Racks (KRF-H/KRFD-H) : That is a solid rack made of Chromoly steel, treated by carburizing. Has high-power, high wear level of resistance, and allows downsizing of SR racks. J Series products are also available.
Hardened Racks (SRF-H/SRFD-H) : Stable Hardened racks with high power, extended life span are reasonably priced. J Series items are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Metal Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack gets the same tooth elevation and face width sizes, smaller sized and reasonably priced compared to SRF Racks
Steel Racks (SR) : Low priced, large choices of modules and number of teeth. J Series products are also available.
Metal Racks w/ Machined Ends (SRF) : Low cost, large selections of modules and quantity of tooth. J Series items are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low cost, large choices of modules and number of teeth. J Series items are also available.
Stainless Steel Racks (SUR•SURF•SURFD) : Suitable for food machinery because of SUS304 material\’s rust-resistant quality.
Plastic material Racks (DRF/DRFD/DRFK) : Plastic racks with small dimensional change, absorb lower water than MC Nylon racks. J Series products are also available.
Plastic-type Racks (PR•PRF) : Made form MC nylon, can be used without lubrication.
Brass Racks (BSR) : Little pitch racks manufactured from free-cutting brass, excellent workability and high rust resistance.
Steel Circular Racks (SRO – SROS) : Convenient in applications where in fact the rack gets the reciprocal motion. S Type is easy to install.
Stainless Steel Circular Racks (SURO) : Same dimensions as SRO racks, except in stainless steel. Make use of where rust-resistance is required.
Surface Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent items with high precision and power, and low sound and abrasion characteristics.
Metal Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration because of larger get in touch with ratio of helical gears.
Molded Flexible Racks (DR) : Used in applications because of its flexibility, where steel racks do no possess this attribute. Pinions and accessories are also available.
Molded Versatile Rack Clamps (SRS) : Used to secure Molded Versatile Racks.
Molded Flexible Rack Pinions (SSDR) : Spur pinions utilized for molded versatile racks.
Flexible Rack Guide Rails (ARL) : Guideline Rails for Molder Flexible Racks.
You can expect as standard an array of Racks in Metric and Imperial sizes. Spur Racks can be found in Steel (En8) or more to 2 metres long. Stainless Steel and Delrin (Plastic-type) Racks are created with Spur and Helical tooth forms, square and circular sections up to 400mm long. Alternative materials are available on demand. Moulded Hostaform Racks can be found to offer a cost-effective alternative where less torque is required.
Variable stiffness can enhance the capacity for human-robot interacting. Based on the mechanism of a versatile rack and equipment, a rotational joint actuator called vsaFGR can be proposed to modify the joint stiffness. The versatile gear rack can be regarded as a mixture of a nonlinear elastic element and a linear adjusting mechanism, providing advantages of compactness. The joint stiffness is in the range of 217-3527 N.m/rad, in fact it is inversely proportional to the 4th-order of the apparatus displacement, and nearly independent from the joint angular deflection, providing advantages of quick stiffness regulation in a brief displacement of 20 mm. The apparatus displacement with regards to the flexible equipment rack is certainly perpendicular to the joint loading drive, so the power required for stiffness regulating is really as low as 14.4 W, providing benefits of energy saving. The high compactness, great stiffness range and low power cost of vsaFGR are proved by simulations and experiments.