China Professional Hospital Vacuum Pump for Men Wound Care Medical vacuum pump design

Product Description

Introduction

Product Features

With ultra-low negative pressure design (-50mmHg to -450mmHg) which is continuously adjustable.

With super-smart design and multi operating mode which is more practical.

With stable performance and long life which can operate more than 10,000 hours continuously.

The elaborate designed muffler system controls running noise of the device in a very low range (less than 45 dB), which does not affect the patient’s rest.

With microcomputer chip controlled, it has high accuracy and user-friendly operation interface.

Its intelligent memory system can automatically record the parameters and modes in the last setup, free from repeatedly setting after each starting up.

LCD digital display makes it convenient for user to adjust and operate.

 

Multiple safety power supply solutions:

1 .It adopts AC/DC power supply with the host in use of full DC power, having no danger of electric shock; 

2.lts built-in spare battery may still endure 4 hours after a power failure, while it can last 8 hours in intermittent mode;

3.A 12V 5A vehicle DC power supply can also be used to ensure the continuous treatment of patients with negative pressure suction unit, when being transferred or going out;

Equipped with overflow alarm device, the unit will automatically stop in service and alarm when the dirty liquid reaches the warning line, to prevent the solution into the host and to avoid secondary pollution and damage.

With the function of automatic gas-leak alarm, the unit will then spontaneously stop and alarm when the negative pressure value remains no change within 10 minutes after the operation.

Multiple safety protections: gas-leak alarm, automatic overheat prevention, overflow prevention, etc.

 

Product Property

Adjustable scope: lOmmHg

Negative pressure range: -50 mmHg -450 mmHg; pressure display error: +0.2%

Suction flow: 1.51 /min~ 8.0L /min

Intelligence Setup: multi operation setup, more practical 

Noise:not more than 45Db

External power supply:

12V 5A DC switch power (medically certified); the host, DC powered, has no risk of electric shock

Operation status:continuous and intermit-10t

multiple safety protections:

leakage alarm; automatic heat

dissipation while overheated,

anti-overflow protection

 

Scope of Application:

Suitable of acute wound,chronic diabetic wound and wound drainage of more exudate after surgery.

 

Contraindications:

Debridement undone or wound with the necrotic eschar; Wound with tumor tissue;Sinus connected with the organs; Wound with great vessels or organs exposed.

Detailed Photos

 

Packing list:
 

NO. Description Quantity
1 Negative Pressure Drainage Device 1
2 AC Adapter & AC cable 1
3 User  Manual 1
4 Solution collection bottle 1
5 Bottle cap 1
6 Connection interface 3
7 Silicon gel bent pipe 3
8 Filter 3
9 European standard plug 1

Case 1
1. Right foot skin necrosis, infection;
2. Open fractures of the first wedge of the right foot;
3. After debridement suture of right foot skin laceration;
4. After open fracture operation of middle and lower segment of right femur.

 

FAQ

FAQ  

Q1Are you trade company or manufacture?

A1: We are manufacture. We have 2 factories in HangZhou and HangZhou City, and we sincerely welcome you visit our factory.

Q2Can I get some samples?

A2: We are glad to offer you free sample.

Q3:What certificate does your company have?

A3: CE, EN ISO13485 Certification. If you need, we can send you the copy.

Q4Are the OEM and ODM available?

A4: Yes. We offer OEM and ODM service. About new product, you can send us your sample. And we make sample for you. For your own brand, you can also send us your design of package and we make the package according to your requirement.

Q5What is the Grade of your clean room?

A5: Our clean room is 100,000 grades.

Q6If we need registration in our own country, then what kind of assistance you can offer?

A6: We can prepare the documents you need; free sample and other thing that can help you finish the registration.

Q7Is there cheap shipping cost to import to our country?

A7: For small order, express will be best. And for bulk order, sea ship way is best but take much time. For urgent orders, we suggest via air to airport plus our ship partner send to your door.

Q8: Can we get support if we have our own market position?

A8: Please inform us your detailed mind on your market demand, we will discuss and propose helpful suggestion for you, to find the best solution for you.

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Type: Portable
Function: Treatment
Theory: Vacuum Pressure
Certification: CE, ISO13485, FSC
LCD Display: With LCD Display
Group: Adult
Customization:
Available

|

portable vane pump

How long can portable vacuum pumps run continuously on a single charge or tank?

The duration of continuous operation for portable vacuum pumps on a single charge or tank can vary depending on several factors, including the specific model, battery capacity, pump capacity, and the level of vacuum required. Here are some key points to consider:

Battery-Powered Vacuum Pumps:

If the portable vacuum pump is battery-powered, the runtime will depend on the capacity and condition of the battery. Manufacturers typically provide information about the expected runtime under specific operating conditions. The runtime can range from a few minutes to several hours, depending on the pump’s power consumption and the battery’s capacity. It is important to refer to the manufacturer’s specifications to determine the expected runtime for a particular model.

Tank Capacity:

Some portable vacuum pumps may feature an integrated tank or reservoir to collect the vacuumed air or fluid. The tank capacity can vary depending on the pump’s design and intended application. The runtime of the pump on a single tank will depend on the pump’s flow rate and the size of the tank. A larger tank will allow for a longer duration of continuous operation before it needs to be emptied or emptied. Again, it is advisable to refer to the manufacturer’s specifications to determine the tank capacity and its impact on runtime.

Pump Capacity and Duty Cycle:

The pump capacity and duty cycle can also affect the runtime of a portable vacuum pump. Pump capacity refers to the rate at which the pump can create a vacuum or move air or fluid. A higher pump capacity may result in faster vacuum creation but could also consume more power, potentially reducing the runtime. Duty cycle refers to the amount of time the pump can run continuously before it needs to rest or cool down. Some pumps may have a duty cycle of 50%, which means they can operate for a maximum of 5 minutes out of every 10 minutes. Duty cycle limitations help prevent the pump from overheating and ensure its longevity. It is essential to consider the pump capacity and duty cycle when estimating the continuous runtime of a portable vacuum pump.

Operating Conditions:

The operating conditions can also impact the runtime of a portable vacuum pump. Factors such as the level of vacuum required, the ambient temperature, the viscosity of the fluid being handled, and the presence of any restrictions or blockages in the system can affect the pump’s performance and runtime. Operating the pump under extreme conditions or pushing it beyond its designed capabilities may result in reduced runtime or performance.

It’s important to note that the runtime estimates provided by manufacturers are based on ideal conditions, and actual runtime may vary in practice. To maximize the runtime of a portable vacuum pump, it is recommended to follow the manufacturer’s guidelines, ensure proper maintenance and calibration, and avoid overloading or overheating the pump.

In summary, the duration of continuous operation for portable vacuum pumps on a single charge or tank depends on various factors, including the battery capacity, tank capacity (if applicable), pump capacity, duty cycle, and operating conditions. Reviewing the manufacturer’s specifications and guidelines is crucial to determine the expected runtime for a specific model and to ensure optimal performance.

portable vane pump

Are there noise considerations when using portable vacuum pumps?

Yes, there are noise considerations to take into account when using portable vacuum pumps. The noise generated by a vacuum pump can have various implications, including workplace safety, environmental impact, and user comfort. Here are some important points to consider regarding noise when using portable vacuum pumps:

  • Workplace Safety: Excessive noise levels can pose a risk to workers’ health and safety. Prolonged exposure to high noise levels can lead to hearing damage or loss. It is essential to assess the noise levels produced by the vacuum pump and ensure that they comply with occupational health and safety regulations. If the noise exceeds permissible limits, appropriate measures, such as hearing protection equipment or noise reduction strategies, should be implemented.
  • Environmental Impact: In certain settings, such as laboratories or research facilities, noise generated by vacuum pumps can affect the surrounding environment. Excessive noise may interfere with sensitive experiments, measurements, or research activities. It is important to consider the noise emissions of the portable vacuum pump and select models that offer quieter operation whenever possible.
  • User Comfort: Noise levels can also impact user comfort and convenience. Operating a vacuum pump that produces loud noise for prolonged periods can be unpleasant and cause fatigue or stress. Choosing a portable vacuum pump with lower noise emissions can help create a more comfortable working environment for users.
  • Noise Reduction Measures: There are several measures that can be taken to mitigate noise levels when using portable vacuum pumps. These include:
    • Isolation: Placing the vacuum pump in an acoustically insulated enclosure or isolating it from the surrounding area can help reduce noise transmission.
    • Vibration Control: Using anti-vibration mounts or pads can minimize the transmission of vibrations from the pump to the surrounding surfaces, which can contribute to noise generation.
    • Noise Enclosures: Using purpose-built noise enclosures or soundproof cabinets can provide an effective solution for reducing noise levels. These enclosures are designed to absorb and dampen noise, creating a quieter operating environment.
    • Maintenance: Regular maintenance, such as lubricating moving parts and ensuring proper alignment, can help reduce noise caused by mechanical wear or inefficiencies in the vacuum pump system.
    • Upgrading Equipment: When noise reduction is a critical consideration, upgrading to newer models or technologies specifically designed for quieter operation can be beneficial.

It is important to note that the noise levels produced by portable vacuum pumps can vary depending on the pump type, design, and operational conditions. When selecting a portable vacuum pump, it is advisable to review the manufacturer’s specifications, including the noise level ratings, to make an informed decision based on the noise requirements of your specific application.

By considering the noise implications and implementing appropriate measures, users can minimize the potential negative effects associated with the noise generated by portable vacuum pumps, promoting a safer and more comfortable working environment.

portable vane pump

What are the advantages of using a portable vacuum pump?

Using a portable vacuum pump offers several advantages in various applications. Here are some key benefits of using a portable vacuum pump:

  1. Portability and Mobility: As the name suggests, portable vacuum pumps are designed to be easily transported and used in different locations. They are compact, lightweight, and often have carrying handles or straps, allowing for convenient mobility. This portability makes them ideal for on-site or mobile operations where a vacuum or pressure source is required.
  2. Versatility: Portable vacuum pumps are versatile tools that can be used in a wide range of applications. They find applications in industries such as HVAC, automotive, electronics, laboratories, and more. Whether it’s evacuating air from a refrigeration system, pressure testing components, or creating a controlled environment for experiments, portable vacuum pumps can adapt to different requirements.
  3. Convenience and Efficiency: Portable vacuum pumps provide a convenient and efficient solution for generating vacuum or pressure. They are typically easy to operate, with user-friendly controls and gauges to adjust and monitor the vacuum or pressure levels. This allows for precise control and efficient operation, saving time and effort compared to manual methods.
  4. On-Site Operation: The ability to operate on-site or in remote locations is a significant advantage of portable vacuum pumps. This eliminates the need to transport equipment or components to a central vacuum system, saving both time and costs. Portable vacuum pumps can be used directly at the location where the vacuum or pressure is required, increasing flexibility and reducing downtime.
  5. Reduced Contamination Risks: In applications where cleanliness is critical, such as semiconductor manufacturing or laboratory experiments, portable vacuum pumps offer the advantage of minimizing contamination risks. Oil-free portable vacuum pumps eliminate the risk of oil contamination, ensuring a clean and particle-free vacuum or pressure source.
  6. Cost-Effectiveness: Portable vacuum pumps often provide a cost-effective solution compared to larger, centralized vacuum systems. They have a lower initial investment cost, require less maintenance, and consume less energy. Additionally, the versatility and mobility of portable vacuum pumps can eliminate the need for multiple specialized systems for different locations or applications.

Overall, the advantages of using a portable vacuum pump include portability, versatility, convenience, efficiency, on-site operation, reduced contamination risks, and cost-effectiveness. These factors make portable vacuum pumps valuable tools in a wide range of industries and applications.

China Professional Hospital Vacuum Pump for Men Wound Care Medical   vacuum pump design		China Professional Hospital Vacuum Pump for Men Wound Care Medical   vacuum pump design
editor by Dream 2024-05-10

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *